Waterworks IC8 Remote Undersink Chiller

$900.00
SKU
waterworks-ic-8-undersink-water-cooler

Due to the compact design, energy efficiency and quiet operation the IC8 Water Cooler is the obvious choice for household applications and offices alike.

The lC8 Undersink Chiller can be installed in small spaces in conjunction with any water filtration application from the simple inline water filters to reverse osmosis systems.
It needs adequate cupboard ventilation to function

• Lead and copper free waterways

• 1.9 litre stainless steel chilling tank

• 6 Litres/hour cooling capacity

• Stainless steel internal waterways

• Galvalume corrosion resistant cabinet

• 8 cup initial draw off volume

• Dual, fan assisted static condensers

• Easy to install

• 2 year comprehensive warranty

It is also compatible with most boiling water units.

Specifications:

Fully Automatic Operation

CABINET:

The IC8 cabinet is constructed of “Galvalume,” a material with
the ideal blend of Aluminium Zinc and Silicone which provides
the IC8 with superior heat and corrosion resistance.

CHILLING & STORAGE TANK:

Constructed of stainless steel, it has a volume of 1.9 Litres,
is fully insulated and independently tested to withstand over
800psi of static pressure. A drain plug and seal is provided,
which is removable for servicing. The internal waterlines are
1/4”OD stainless steel and are heliarc welded to eliminate
corrosion.

REFRIGERATION SYSTEM:

This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone
depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts.
The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.
The tube on tank style evaporator has six (6) windings around the storage tank for balanced, efficient cooling and the entire
system is controlled by an adjustable, (factory pre-set), thermostat

INSTALLATION:

GENERAL:

The Waterworks IC8 is ideally suited to installation within a relatively confined space such as under the kitchen sink.
As a refrigeration appliance, it relies upon air exchange to function properly and therefore must be provided with
adequate ventilation.

PLUMBING CONNECTIONS:

Both the inlet and outlet are recessed, 1/4” stainless steel
pipes, suitable for connection to industry standard 1/4” quick
connect fittings.

ELECTRICAL CONNECTIONS:

The Waterworks IC8 is Furnished with 1.8 metre GPO power
cable and plug. 240volts, 50Hz. Single phase. Running amps
- 0.74A. Power consumption - 120W (Cooling Capacity).

COOLING PERFORMANCE:

The Waterworks IC8 is capable of cooling approximately 6*LPH (litres per hour) at 10°C.
Cooling Speed: From 27°C to 10°C, 21.6 minutes Cooling Capacity: 5.8 litres/hour/10°C ± 2°C

Draw Off Capacity: 8 cups below 10°C

Air Temperature, (in immediate vicinity of cooler) 32°C

Inlet water temperature, (immediately prior to cooler inlet) 27°C.

All capacities and performance data is based on the assumption that adequate
ventilation has been supplied to the unit as per the installation instructions.
Ratings are based on intermittent use under environmental conditions of ARI
Standard 1010 (self contained, mechanically refrigerated drinking water
coolers) and UL399 (drinking water coolers).

Weights and Dimensions

IC8 WEIGHT WIDTH DEPTH HEIGHT SHIPPING
NETT 12.5kg 210mm 410mm 290mm VOLUME
PACKED 13.5kg 230mm 460mm 330mm 0.035M2

WARRANTY

The Waterworks IC8 water coolers are covered by a 2 Year Comprehensive Warranty

Copyright © 2020 The Pure Water Shop. All rights reserved.